Enameled Wire Technical Parameters

Technical Reference

Enameled Wire Technical Parameters

A complete guide to conductor diameter, film thickness, outside diameter, and electrical resistance for correct wire selection.

Introduction

Selecting the correct enameled wire for a motor, transformer, or coil application requires more than just knowing the conductor diameter. Several parameters work together to determine whether a wire will perform reliably in your specific design.

This guide explains the key technical parameters found in enameled wire specifications, followed by a comprehensive reference table covering conductor diameters from 0.02 mm to 5.00 mm for copper, copper-clad aluminum (CCA), and aluminum conductors.

Key Parameters Explained

01

Conductor Diameter (mm)

The nominal diameter of the bare metal conductor before insulation is applied. This is the primary parameter for wire selection.

02

Tolerance (±mm)

The acceptable variation in conductor diameter. Tighter tolerances are critical for automated winding and consistent coil resistance.

03

Minimum Film Thickness

The minimum increase in diameter due to the insulation. Grades 1, 2, and 3 correspond to increasing insulation thickness levels, with Grade 1 being the thinnest and Grade 3 the thickest.

04

Maximum Outside Diameter

The maximum overall diameter including insulation. This determines the space required in the winding window.

05

Conductor Resistance

The DC resistance per meter at 20°C. Lower resistance means better conductivity. Copper has the lowest resistance, followed by CCA, then aluminum.

Technical Parameters Table

Conductor diameters from 0.02 mm to 5.00 mm. Use the horizontal scroll bar to view all columns.

Dia. (mm)Tolerance (±mm)Min. Film Thickness (mm)Max. Outside Diameter (mm)Copper Resistance (Ω/m)CCA Resistance (Ω/m)Aluminum Resistance (Ω/m)
Gr.1Gr.2Gr.3Gr.1Gr.2Gr.3MinMaxMinMaxMinMax
0.020.0010.0020.004—0.0240.027—48.9759.85————
0.030.0010.0030.006—0.0370.041—22.08526.96————
0.040.0010.0040.008—0.0490.054—12.86915.634————
0.050.0010.0050.010—0.0600.066—7.6829.937————
0.060.0010.0060.012—0.0720.079—5.4376.756————
0.070.0030.0070.0120.0180.0830.0900.0964.054.895.9737.236——
0.080.0030.0070.0140.0200.0940.1010.1083.1333.7034.6215.478——
0.090.0030.0080.0150.0220.1050.1130.1202.4952.9003.6804.291——
0.100.0030.0080.0160.0230.1170.1250.1322.0342.3333.0003.4523.2753.774
0.110.0030.0090.0170.0260.1280.1370.1451.6901.9172.4932.8372.7213.102
0.120.0030.0100.0190.0280.1390.1490.1581.4261.6042.1042.3732.2972.594
0.130.0030.0110.0210.0300.1500.1610.1711.2201.3611.7992.0141.9642.202
0.140.0030.0110.0210.0300.1600.1710.1811.0551.1701.5571.7311.6991.892
0.150.0030.0120.0230.0330.1710.1820.1930.92191.0151.3601.5031.4841.643
0.160.0030.0120.0230.0330.1820.1940.2050.81220.89061.1981.3181.3081.441
0.170.0030.0130.0250.0360.1940.2050.2170.72100.78711.0641.1651.1611.273
0.180.0030.0130.0250.0360.2040.2170.2290.64440.70070.95051.0371.0381.133
0.190.0030.0140.0270.0390.2160.2280.2400.57930.62780.85450.92880.93281.016
0.200.0030.0140.0270.0390.2260.2390.2520.52370.56570.77240.83690.84320.9150
0.210.0030.0150.0290.0430.2380.2520.2660.47570.51230.70160.75800.76590.8287
0.220.0040.0150.0290.0430.2500.2620.2760.43010.47050.63440.69620.69250.7611
0.230.0040.0160.0310.0460.2610.2770.2920.39410.42980.58130.63590.63460.6953
0.240.0040.0170.0320.0480.2710.2870.3020.36250.39410.53470.58320.58360.6376
0.250.0040.0170.0320.0480.2810.2970.3120.33450.36280.49340.53670.53860.5868
0.260.0040.0170.0320.0480.2920.3090.3250.30960.33500.45670.49560.49850.5418
0.270.0040.0170.0320.0480.3020.3190.3350.28740.31020.42400.45900.46280.5019
0.280.0040.0180.0330.0500.3120.3290.3450.26760.28820.39470.42640.43080.4662
0.290.0040.0190.0350.0530.3240.3420.3500.24970.26840.36830.39710.40200.4341
0.300.0040.0190.0350.0530.3340.3520.3600.22300.25220.34220.37320.37350.4081
0.310.0050.0190.0350.0530.3440.3620.3790.21740.23600.32080.34920.35020.3817
0.320.0050.0190.0350.0530.3540.3720.3890.20430.22120.30140.32730.32900.3579
0.330.0050.0200.0380.0570.3670.3860.4030.19230.20780.28360.30750.30960.3362
0.340.0050.0200.0380.0570.3770.3960.4130.18130.19560.26740.28940.29190.3164
0.350.0050.0200.0380.0570.3870.4060.4230.17120.18440.25260.27290.27570.2983
0.360.0050.0200.0380.0570.3970.4160.4330.16200.17420.23890.25770.26080.2818
0.370.0050.0210.0400.0600.4090.4290.4480.15350.16480.22640.24380.24710.2665
0.380.0050.0210.0400.0600.4190.4390.4580.14560.15610.21470.23100.23440.2525
0.390.0050.0210.0400.0600.4290.4490.4680.13830.14810.20400.21910.22270.2396
0.400.0050.0210.0400.0600.4390.4590.4780.13160.14070.19410.20820.21180.2276
0.410.0050.0210.0400.0600.4500.4710.4900.12530.13380.18480.19800.20180.2165
0.420.0050.0210.0400.0600.4610.4830.5030.11950.12750.17620.18860.19240.2062
0.430.0050.0220.0420.0640.4710.4930.5130.11400.12150.16820.17980.18360.1966
0.440.0050.0220.0420.0640.4810.5030.5230.10900.11600.16070.17160.17550.1877
0.450.0050.0220.0420.0640.4910.5130.5330.10420.11090.15380.16400.16780.1793
0.460.0050.0220.0420.0640.5010.5230.5430.09980.10600.14720.15690.16070.1715
0.470.0050.0240.0450.0670.5140.5360.5570.095650.10150.14110.15020.15400.1642
0.480.0050.0240.0450.0670.5240.5460.5670.091740.097290.13530.14400.14770.1574
0.490.0050.0240.0450.0670.5340.5560.5770.088070.093320.12990.13810.14180.1510
0.500.0050.0240.0450.0670.5440.5660.5870.084620.089590.12480.13260.13620.1449
0.510.0050.0240.0450.0670.5540.5760.5970.081370.086080.12000.12740.13100.1392
0.520.0050.0240.0450.0670.5640.5860.6070.078300.082770.11550.12250.12610.1339
0.530.0060.0250.0470.0710.5760.6000.6230.075400.079640.11120.11780.12140.1288
0.540.0060.0250.0470.0710.5860.6100.6330.072650.076980.10680.11390.11660.1245
0.550.0060.0250.0470.0710.5960.6200.6430.070060.074180.10300.10980.11240.1200
0.560.0060.0250.0470.0710.6060.6300.6530.067360.071520.099360.10580.10850.1157
0.570.0060.0250.0470.0710.6160.6400.6630.065040.069010.095940.10210.10470.1116
0.580.0060.0250.0470.0710.6260.6500.6730.062840.066630.092690.098580.10120.1078
0.590.0060.0250.0470.0710.6360.6600.6830.060750.064360.089610.095230.097800.1041
0.600.0060.0270.0500.0750.6490.6740.6980.058760.062220.086680.092060.094600.1006
0.610.0060.0270.0500.0750.6590.6840.7080.056870.060170.083890.089030.091570.09734
0.620.0060.0270.0500.0750.6690.6940.7180.055070.058230.081230.086160.088670.09419
0.630.0060.0270.0500.0750.6790.7040.7280.053350.056380.078690.083420.085900.09120
0.640.0070.0280.0530.0800.6920.7190.7440.051550.054790.076040.081060.083100.08862
0.650.0070.0280.0530.0800.7020.7290.7540.049990.053090.073740.078560.080500.08589
0.660.0070.0280.0530.0800.7120.7390.7640.048510.051480.071550.076170.078100.08328
0.670.0070.0280.0530.0800.7220.7490.7740.047080.049940.069450.073890.075810.08079
0.680.0070.0280.0530.0800.7320.7590.7840.045720.048470.067440.071710.073620.07840
0.690.0070.0280.0530.0800.7420.7690.7940.044420.047060.065520.069630.071520.07612
0.700.0070.0280.0530.0800.7520.7790.8040.043170.045700.063680.067630.069510.07394
0.710.0070.0280.0530.0800.7620.7890.8140.041980.044420.061920.065720.067590.07185
0.720.0080.0300.0560.0850.7750.8040.8310.040720.043300.060060.064070.065560.07005
0.730.0080.0300.0560.0850.7850.8140.8410.039620.042110.058440.062310.063800.06812
0.740.0080.0300.0560.0850.7950.8240.8510.038570.040970.056890.060620.062100.06627
0.750.0080.0300.0560.0850.8050.8340.8610.037560.039870.055400.058990.060470.06450
0.760.0080.0300.0560.0850.8150.8440.8710.036590.038820.053970.057440.058910.06279
0.770.0080.0300.0560.0850.8250.8540.8810.035650.037810.052590.055940.057410.06116
0.780.0080.0300.0560.0850.8350.8640.8910.034750.036830.051260.054500.055960.05958
0.790.0080.0300.0560.0850.8450.8740.9010.033890.035900.049990.053110.054560.05807
0.800.0080.0300.0560.0850.8550.8840.9110.033050.035000.048760.051780.053220.05661
0.810.0090.0320.0600.0900.8690.8990.9280.032170.034210.047460.050620.051800.05535
0.820.0090.0320.0600.0900.8790.9090.9380.031400.033380.046320.049380.050560.05399
0.830.0090.0320.0600.0900.8890.9190.9480.030660.032570.045220.048190.049360.05268
0.840.0090.0320.0600.0900.8990.9290.9580.029940.031790.044160.047030.048210.05142
0.850.0090.0320.0600.0900.9090.9390.9680.029240.031040.043140.045920.047090.05021
0.860.0090.0320.0600.0900.9190.9490.9780.028580.030310.042150.044850.046010.04903
0.870.0090.0320.0600.0900.9290.9590.9880.027930.029610.041200.043810.044970.04790
0.880.0090.0320.0600.0900.9390.9690.9980.027310.028940.040280.042810.043970.04681
0.890.0090.0320.0600.0900.9490.9791.0080.026700.028280.039380.041850.042990.04575
0.900.0090.0320.0600.0900.9590.9891.0180.026120.027650.038520.040910.042050.04473
0.950.0100.0340.0630.0951.0121.0441.0740.023420.024840.034540.036760.037700.04019
1.000.0100.0340.0630.0951.0621.0941.1240.021160.022400.031200.033140.034060.03623
1.050.0110.0340.0650.0981.1231.1561.1870.019930.02050*0.028280.030090.030870.03289
1.100.0110.0340.0650.0981.1731.2061.2370.017600.01860*0.025790.027390.028150.02994
1.150.0130.0350.0670.1001.3061.3391.3710.016100.01710*0.023530.025120.025690.02747
1.200.0130.0350.0670.1001.3111.3441.3760.014670.015580.021630.023050.023620.02520
1.250.0130.0350.0670.1001.3161.3491.3810.013530.014350.019950.021230.021780.02321
1.400.0140.0360.0690.1031.4681.5021.5350.010790.01143————
1.600.0160.0380.0710.1071.6701.7061.7400.0082370.008749————
1.800.0180.0390.0730.1101.8721.9091.9440.0065290.006913————
2.000.0200.0400.0750.1132.0742.1122.1480.0052890.005600————
2.240.0220.0410.0770.1162.3162.3552.3920.0042180.004462————
2.500.0250.0420.0790.1192.5782.6182.6560.0033850.003584————
2.800.0280.0430.0810.1232.8802.9222.961——————
3.150.0320.0450.0840.1273.2333.2763.316——————
3.550.0360.0460.0860.1303.6353.6793.721——————
4.000.0400.0470.0890.1344.0884.1334.176——————
4.500.0450.0490.0920.1384.5914.6374.681——————
5.000.0500.0500.0940.1425.0935.1415.186——————

* For 1.05 mm, 1.10 mm, and 1.15 mm copper conductors, only single reference resistance values were provided. The marked maximum values are estimated at approximately +3% of the reference values and are for display reference only. They are not acceptance criteria. Please refer to the supplier’s test report or the applicable standard for precise limits.

How to Use This Table

Step 01

Determine required resistance

Work backward from your motor’s voltage and current requirements to find the maximum allowable resistance per meter.

Step 02

Select conductor material

Copper offers the lowest resistance. CCA provides a cost-effective balance. Aluminum is the lightest option but requires larger diameters.

Step 03

Choose the film grade

Grade 1 for space-constrained low-voltage applications. Grade 2 (Heavy) is standard for motor windings. Grade 3 for high-voltage or harsh environments.

Step 04

Verify outside diameter

Ensure the maximum outside diameter fits within your winding window or slot dimensions.

Need Help Selecting the Right Wire?

Our engineering team can help you match the right enameled wire to your specific application. Contact us with your requirements for a customized recommendation.

Contact Our Team View All Products

Tel: +86-13621982708  |  www.chingcung.com

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *